Motorbikes and cargo
Ratchet · direct automatic retraction
Falcon 700 Standard
- 25 mm × 3 m
- 700 kg
- Black / Orange
STRAPTOR · Automatic retraction system
With the STRAPTOR System, you secure and tension your load while unused webbing stays contained. When you finish, release the mechanism and the webbing retracts into place.
No tangles. No winding by hand. Less time preparing and storing your straps every time.
Check availability and the expected dispatch date on each product page.
Less time packing up. More time enjoying.
Motorbikes and cargo
Ratchet · direct automatic retraction
Progressive retraction
Ratchet · progressive automatic retraction
Compact
Cam buckle · automatic retraction
Boating
Transom tie-down · permanent mounting
Motorbikes, quads and general cargo
Retractable ratchet straps for securing motorbikes, quads, tools and cargo on trailers, in vans and in other transport vehicles.
Webbing measuring 25 mm × 3 m, a breaking strength of 700 kg and two retraction options:
Packs include the straps, soft loops and a carry bag:
Luggage, bike racks and light loads
A compact retractable strap with a cam buckle, for adjusting the tie-down of luggage, sports equipment and light loads.
Its 25 mm × 3 m webbing retracts into the reel when you finish. Easy to carry in the boot and store between trips.
Breaking strength: 300 kg in straight pull or 600 kg in a loop.
Pack format: pack of 2.
Boating and trailers
A retractable transom tie-down with permanent mounting on the trailer. Install it with the included hardware and it stays ready for every outing.
Hook it on, tension it and, when releasing the tie-down, guide the webbing as it returns to the mechanism.
Webbing: 48 mm × 0.95 m.
Breaking strength: 1,200 kg.
Pack format: pack of 2 with mounting hardware.
More security. More control. Less time on every tie-down.
STRAPTOR keeps unused webbing inside the mechanism. You tension it manually and guide the automatic retraction after use.
Falcon uses a ratchet, Kestrel a cam buckle, and Osprey mounts permanently on the boat trailer.
| At each use | Conventional strap | STRAPTOR System |
|---|---|---|
| Excess webbing | Needs to be gathered and secured | Stays contained inside the mechanism |
| When tensioning | You also manage the webbing left outside | Work without loose excess webbing around you |
| After unloading | Wind up the webbing by hand | Release the mechanism and guide the retraction |
| When storing | Keep the webbing wound up | The webbing stays contained in the strap itself |
When you finish, the webbing returns to the mechanism. You save the effort of winding it by hand and securing it so it does not unravel. One less step after every unload.
The length you do not use stays contained. No loose ends hanging down or needing to be tied to stop them flapping during the journey.
Keep the webbing organised while adjusting the tie-down and checking the anchor points.
Storing the webbing contained makes it easier to keep organised between uses. Avoid leaving it stretched out on the floor or tangled with other straps and tools.
The STRAPTOR System makes it simpler to put away and keep ready for the next outing.
Extend the webbing to the anchor point and attach the hooks. The unused length stays contained in the mechanism.
Adjust the tie-down using the ratchet or cam buckle, depending on the model. Check that the webbing, hooks and anchor points are correctly positioned.
Release the tension, unhook and guide the webbing as it returns to the mechanism. The strap is then ready to store.
Secure. Tension. Release. The webbing retracts on its own.
Certified to EN 12195-2, TÜV SÜD test (report no. 704352507201-00), lashing capacity LC 350 daN.
Breaking strength is a test value. It is neither lashing capacity LC nor the weight you can transport. Select the restraint according to its label, anchor points and lashing configuration.
STRAPTOR offers a 3-year commercial warranty against manufacturing defects, subject to the published terms.
Our team in Spain helps you choose a model, answers questions about use and handles warranty claims.
| Series | Breaking strength |
|---|---|
| Falcon 700 | 700 kg |
| Kestrel 600 | 300 kg in straight pull / 600 kg in a loop |
| Osprey 1200 | 1,200 kg |
Breaking strength is a test value, not the weight of cargo that can be transported using a single strap. Consult the label and instructions when choosing a model and preparing the tie-down arrangement.
For hardware retailers, parts stores, marine suppliers, dealerships and distributors.
Automatic retraction makes sense when you see it work. A demonstration shows how unused webbing stays contained, how the tie-down is adjusted and how the webbing returns to the mechanism when finished.
With STRAPTOR, you can offer a specialist range to customers transporting motorbikes, luggage, boats and work equipment.
Request our B2B price list and purchasing terms to assess the margin on each product and plan your store's range.
Ask about the materials available to present STRAPTOR in store and explain the differences between models.
Speak directly to our team to select products, organise orders and check stock and delivery dates.
Falcon for motorbikes and cargo. Kestrel for luggage and light loads. Osprey for boating and trailers. Each series serves a specific application and shares the STRAPTOR System's automatic retraction.
Tell us about your business, where you sell and the applications your customers need.
